Welcome to Shenzhen Jiangtian packing material Co. Ltd website!

4006-567-345

导电吨袋

News

Product

Contact

Company name: Shenzhen Jiangtian packing

Number:4006-567-345

E-mail:83315718@163.com

Website:www.riversky.cn

Address:Shenzhen city Longgang Pingdi Street East Community Taihe Road No. 9 Jiang Industrial Park

Parameters of materials purchased before production of antistatic tonnage bags

Your current location: Home >> News >> Company news

Parameters of materials purchased before production of antistatic tonnage bags

Release date:2017-11-17 Author:Jiangtian packing Click:


Shenzhen Jiangtian packing material Co. Ltd, based on the quality, procurement in the production of anti-static bag in front of tons of tons of bags of material parameters the strict requirements of the following standards.

抗静电吨袋


The main material is divided into polypropylene bag and polyethylene bag. According to the sewing method, it is divided into sewn bottom bag and seam bottom bag.

Test method:

Tensile load


Test conditions:

1. according to GB/T 1039. The sample was adjusted to 4h at temperature of 23, 2 and constant, and the test was carried out under this condition.

2. the test equipment should comply with the relevant equipment regulations of the GB/T1040-1992 sixth chapters: the fixture spacing is 200mm, and the drop speed of the empty car is 200mm/min + 20mm/min.


Sampling methods:

1. in the sewing surface as the sample surface is folded, in each bag, from weft and seam to seam, the bottom to sample two, length 300mm, width is about 60mm, and then modified to 50mm, such as the last one more than half root are left. The stitches on both sides of the specimen shall be properly long and three knots on each side.

Record the tensile load of the sample and take its arithmetic average.

2.In the test, if the sample is broken and slipped in the fixture, the test should be redone.


Heat resistance:

1. from the bag to the zonal specimen, two pieces, long 300mm and wide 20mm.

The surface is overlapped and applied to a 9.8 N load. The 1H is placed in the oven at 80 degrees. After removing it, the two overlapped samples are immediately separated to check whether the surface has any abnormal conditions such as adhesion and dissolution.

Fall resistance

2. the test environment is normal temperature and constant humidity.

3. the test site is the surface of the cement.

The filling coefficient of 

4. is 0.80 ~ 0.85.


Test quality and material selection:

1.TA bag is 20kg polypropylene, polyethylene resin or material with equal density.

2.A bags are 25kg polypropylene, polyethylene resin or material with equal density.

The 3.B bag is 40kg urea or the material with the same density;

The 4.C bag is 50kg urea or the material with the same density.


Order of test:

The first one: vertical, horizontal and lateral

Second: horizontal - lateral - longitudinal

Third: lateral longitudinal horizontal direction

The sample was placed at the height of 1.2m, and the three fall tests were made in the order of 5.7.5 to check whether there was a bag rupture and the leakage of the packing.


Health performance:

It is carried out according to GB/T5009.60.


Inspection rules:

Group

The same type and specifications are a batch of no more than 150 thousand pieces per batch.


This article URL:http://www.riversky.cn/en/news/373.html

Related tags:抗静电吨袋

en.png

Address:Shenzhen city Longgang Pingdi Street East Community Taihe Road No. 9 Jiang Industrial Park         Number:   4006-567-345    0755-28111128           Email:83315718@163.com

Fax:0755-82499911